Networking Tips Tricks

I’ve been trying to compile ISC DHCP 4.1 and to get it installed on a Solaris 10 u6 (11/08) zone for a few days. Compiling ISC DHCP is a simpler, as long as you are using gcc and not Solaris cc The issues have arisen when it has come to run ISC DHCP in a Solaris 10 zone . Read further to know more about setting a Solaris Container SunCluster resource to run ISC DHCP in a zone! ...

Default serial console settings for  Linksys  Switch SRW224G4 (can be changed): Bits per second: 38400 Data bits: 8 Parity: None Stop bits: 1 Flow Control: None Works great in  PuTTy , just set connection type to 'Serial' and set speed manually (38400). You'll need a "console" cable for this, but its not a rollover - it's a DB9F to DB9F straight through. Default settings info Default IP: 192.168.1.254 username: admin password:  (password is blank) To reset to defaults  ( from  homecommunity.cisco.com ) : Connect to the console port using terminal emulation parameters (see above) Reboot switch Hold down Ctrl+U while rebooting Menu will be displayed Select > [D] Delete file Type startup-config (be sure that this is the ONLY file that you delete – if you delete other files, you will have to reload the firmware) Now you have erased the configuration file and you should be able to reboot and login with the default username and password.