Default serial console settings for Linksys Switch SRW224G4 (can be changed):
Works great in PuTTy, just set connection type to 'Serial' and set speed manually (38400).
You'll need a "console" cable for this, but its not a rollover - it's a DB9F to DB9F straight through.
Default settings info
Default IP: 192.168.1.254
username: admin
password: (password is blank)
To reset to defaults (from homecommunity.cisco.com):
- Bits per second: 38400
- Data bits: 8
- Parity: None
- Stop bits: 1
- Flow Control: None
Works great in PuTTy, just set connection type to 'Serial' and set speed manually (38400).
You'll need a "console" cable for this, but its not a rollover - it's a DB9F to DB9F straight through.
Default settings info
Default IP: 192.168.1.254
username: admin
password: (password is blank)
To reset to defaults (from homecommunity.cisco.com):
- Connect to the console port using terminal emulation parameters (see above)
- Reboot switch
- Hold down Ctrl+U while rebooting
- Menu will be displayed
- Select > [D] Delete file
- Type startup-config (be sure that this is the ONLY file that you delete – if you delete other files, you will have to reload the firmware)
- Now you have erased the configuration file and you should be able to reboot and login with the default username and password.
Comments