Citrix XenApp Interview Questions and Answers Part1

QUESTION NO: 1
Scenario: A company's XenApp farm is spread across four geographically separated datacenters. Each datacenter is its own zone in the farm. Datacenter A contains 50 servers. Datacenter B contains 100 servers. Datacenter C contains 20 servers, and Datacenter D contains 10 servers, one of which is the license server.
Which datacenter would be the appropriate location for the farm's data store?
A. Datacenter A
B. Datacenter B
C. Datacenter C
D. Datacenter D

Answer: B

QUESTION NO: 2
Which port is used by the Citrix License Administration Console?
A. 2598
B. 7279
C. 8082
D. 27000

Answer: C

QUESTION NO: 3
Scenario: A user successfully launched a published application delivered from a XenApp server running within the user's LAN. Session Reliability has been disabled. Which port is used for communication between the Citrix online plug-in and the XenApp server?
A. 80
B. 1494
C. 2598
D. 3389

Answer: A

QUESTION NO: 4
Scenario: A user successfully launched a published application through an Access Gateway. The application is delivered from a XenApp server running in the datacenter and Session Reliability has been enabled. Which port is used for communication between the Access Gateway and the XenApp server?
A. 80
B. 443
C. 1494
D. 2598

Answer: D

QUESTION NO: 5
Statement best describes the purpose of the data collector?
A. It verifies a user's permissions for the requested application.
B. It is used by the Delivery Services Console to run the farm discovery.
C. It authenticates the user and populates the Web Interface with their icons.
D. It maintains and communicates farm information to data collectors in other zones

Answer: D

QUESTION NO: 6
Scenario: A XenApp farm is located in a datacenter in New York. A request has been made to add a XenApp server in London. The WAN network connection is stable enough to allow the new server to exist in the New York farm. What should be done by the administrator to ensure that the least amount of Citrix IMA traffic traverses the WAN?
A. The administrator needs to create a new zone and add the new server to that zone, making it the zone data collector.
B. The administrator does not need to create a new zone because Citrix IMA traffic will only originate from the data collector.
C. The administrator does not need to create a new zone if "Not Preferred" is specified as the election preference for the new server.
D. The administrator does not need to create a zone for the new server, but rather create a new farm and link Citrix IMA traffic in the Delivery Center.

Answer: D

QUESTION NO: 7
Which three options can an administrator use to add members to the Remote Desktop Users group during a XenApp installation? (Choose three.)
A. Power Users
B. Domain Users
C. Administrators
D. Anonymous Users
E. Authenticated Users
F. List of users from the Users Group

Answer: D,E,F

QUESTION NO: 8
Which method can be used when changing the farm membership of a server?
A. Run the QFARM command.
B. Run the CHFARM command.
C. Use XenApp Server Role Manager.
D. Use the Delivery Services Console.

Answer: B

QUESTION NO: 9
Which statement correctly describes behavior of the XenApp Server Role Manager?
A. Remote Desktop Services will be automatically installed. Within the XenApp Server role the online plug-in is automatically installed.
B. Remote Desktop Services will need to be installed separately. Within the XenApp Server role the online plug-in is automatically installed.
C. Remote Desktop Services will be automatically installed. Within the XenApp Server role both the online and offline plug-in are automatically installed.
D. Remote Desktop Services will need to be installed separately. Within the XenApp Server role both the online and offline plug-in are automatically installed.

Answer: C

QUESTION NO: 10
Scenario: The main application used in an organization is the CRM application, which is published in a separate application folder called CRM. An administrator must configure delegated administration rights for the help desk. The help desk's administrative rights will need to be limited to:
- View all areas of the Delivery Services Console.
- Perform session tasks related to their job, such as resetting sessions across the farm.
Which approach would give the required result for the help desk group?
A. Configure View Only permissions for the Delivery Services Console and configure Full
administration permissions for the sessions node.
B. Configure View Only permissions for the Delivery Services Console and configure Full
administration permissions for the CRM application folder.
C. Configure View Only permissions for the following nodes: Administrators, Farm Management, Printers and Printer Drivers, Applications and Server Information. Configure Full administration permissions for "Sessions" under the servers node.
D. Configure View Only permissions for the following nodes: Administrators, Farm Management, Printers and Printer Drivers, Applications and Server Information. Configure Full administration permissions for "Sessions" under the CRM folder in the application node.

Answer: D

QUESTION NO: 11
Which lightweight plug-in is installed with minimal user interaction?
A. MAC plug-in
B. Online plug-in
C. Online plug-in - Web
D. Secure Access plug-in

Answer: C

QUESTION NO: 12
Scenario: Users access their XenApp applications through a Web Interface. Each XenApp server has all the required applications installed. The administrator discovers that users are being connected to several different XenApp servers while using their applications, causing profile corruption. How should the administrator resolve this issue?
A. Utilize the session sharing feature by standardizing all published application settings.
B. Utilize the Session Reliability feature by upgrading all online plug-ins to the latest version.
C. Utilize the session sharing feature by standardizing only the screen resolution on all published applications.
D. Utilize the Session Reliability feature by opening port 2598 between the XenApp servers and the Web Interface server.

Answer: A

QUESTION NO: 13
Which two methods can an administrator use to deliver the plug-in to multiple users at the same time? (Choose two.)
A. Microsoft transform file
B. Command line interface
C. Merchandising Server rules
D. Active Directory Group Policy

Answer: A

QUESTION NO: 14
An administrator has configured an HDX Media Stream for Flash (client-side) policy and set the Flash latency threshold to 75 milliseconds. What will the result be if the latency between the server and client device is greater than 75 milliseconds?
A. Flash content quality is improved.
B. Flash content quality is degraded.
C. Flash content is rendered on the client.
D. Flash content is rendered on the server.

Answer: B

QUESTION NO: 15
Scenario: Users want the best performance when displaying images in their sessions. The
administrator decides to configure HDX 3D Image Acceleration to remove redundant data from the images and improve the image transfer speed. The administrator wants to set this feature to remove the maximum amount of redundant data so it uses the minimum bandwidth requirements. Which glossy compression level setting must the administrator select to meet these requirements?
A. None
B. Low
C. Medium
D. High

Answer: D

QUESTION NO: 16
Scenario: An administrator has published RealOne Player in the farm so users can view
multimedia files from within their sessions and play them on their client devices. HDX
Media Stream Multimedia Acceleration is enabled in the farm. Users are complaining that the multimedia files are NOT playing correctly.
What must the administrator do to ensure that multimedia files play in user sessions?
A. Disable audio on the server.
B. Enable HDX Media Stream for Flash.
C. Increase the buffer size on the server.
D. Install video and audio codecs on the client device

Answer: D

QUESTION NO: 17
Where is Smooth Roaming configured?
A. In the plug-in
B. In a Citrix policy
C. In the farm properties
D. In the Web Interface site properties

Answer: D

QUESTION NO: 18
Which option is used to establish farm-wide shadowing settings to force a shadow acceptance prompt and force logging on all shadow connections?
A. Citrix policy
B. Shadow Taskbar
C. XenApp Server Role Manager
D. Web Interface Management Console

Answer: A

QUESTION NO: 19
Where is CPU Utilization Management configured?
A. Farm properties
B. CitrixUsers policy
C. CitrixComputers policy
D. Worker Group properties

Answer: A

QUESTION NO: 20
An administrator wants to know the server load for a server named CTXXA01. Which two commands can an administrator use from any Citrix server in the farm to get the proper
results? (Choose two.)
A. qfarm /load
B. query farm CTXXA01 /load
C. query user /server:CTXXA01
D. query session /server:CTXXA01

Answer: A,B

QUESTION NO: 21
Scenario: The Citrix IMA Service test in Health Monitoring and Recovery is configured to run on a server. An administrator needs to ensure that if the test fails, existing ICA connections are maintained and attempts to reconnect disconnected sessions are made, but new ICA sessions cannot be started on the server. 
Which recovery action must the administrator select for the test?
A. Alert Only
B. Restart IMA
C. Reboot Server
D. Remove Server from load balancing

Answer: B

QUESTION NO: 22
Scenario: An administrator for an organization needs to limit the sessions to one connection for vendors and authenticated users. However, HR department members must run two sessions at once. The administrator creates three policies to control the number of user sessions.
- Policy A Limits ALL users to one session
- Policy B Limits Vendors to one session
- Policy C Limits HR to two sessions
In order to ascertain the policy behavior the administrator must determine the level of priority to allow the HR department access to multiple sessions. Which priority is needed to apply these policies and to ensure that HR is able to run two sessions simultaneously?
A. Set the priority of Policy B to the highest level, Policy C to the next level and Policy A to the lowest level.
B. Set the priority of Policy B to the highest level, Policy A to the next level and Policy C to the lowest level.
C. Set the priority of Policy A to the highest level, Policy B to the next level and Policy C to the lowest level.
D. Set the priority of Policy C to the highest level, Policy B to the next level and Policy A to the lowest level.

Answer: A

QUESTION NO: 23
Scenario: An administrator needs to configure the XenApp farm in a highly secure environment. All administrative actions must be logged, even if the configuration logging database is unavailable.Which two options must the administrator configure to make this as secure as possible? (Choose two.)
A. Ensure all administrators know the database password.
B. Enable IMA encryption before enabling configuration logging.
C. Use a shared database account for access to the configuration logging database.
D. Ensure the 'Allow changes to the farm when logging database is disconnected' option is not selected.

Answer: B,D

QUESTION NO: 24
Which role is assigned to a custom XenApp Administrator by default?
A. Add server to farm
B. View Administrators
C. Log on to Management Console
D. View all areas of server farm management

Answer: C

QUESTION NO: 25
Scenario: An administrator wants to use session sharing for all published applications. All
applications are installed and published on all of the servers in the farm.
What else must the administrator do to ensure that session sharing is used?
A. Specify file type associations.
B. Enable the Connection access control policy rule.
C. Ensure the offline plug-in is installed on client devices.
D. Configure all published applications with the same settings.

Answer: D

QUESTION NO: 26
Scenario: An administrator is setting up a new XenApp environment for a warehouse. Thin clients will be used with a Linux-based operating system and XenApp will be delivered across a low speed wide area network. Users will need to be given an experience similar to what is available from a Windows desktop operating system. Which type of published application will allow for this?
A. Server Desktop
B. Remote Desktop
C. Published content
D. Published application, Explorer.EXE, installed on a server

Answer: A

QUESTION NO: 27
Scenario: Users frequently open documents on their local PCs. Going forward, an administrator plans to have the users open documents with the published application on the XenApp servers. Which action must the administrator take to accomplish this?
A. Install the offline plug-in.
B. Configure the Web Interface to allow content redirection.
C. Verify the Client drive redirection user policy is enabled.
D. Associate the required file type to the published application.

Answer: D

QUESTION NO: 28
Which two statements are correct for an application delivered to a client device by Citrix
application streaming? (Choose two.)
A. It requires the offline plug-in to be installed.
B. It can be used when connected to the network.
C. It consumes CPU and memory resources on the XenApp server.
D. Screen updates are sent from the server using the ICA protocol.

Answer: A,D

QUESTION NO: 29

Scenario: An administrator has been asked to roll out a new version of an existing application. The new software needs to be deployed alongside the existing version without making any permanent changes to the XenApp servers. Clients are a mixture of Windows and Linux thin clients and all have the XenApp online plug-in installed.
How should the administrator roll out the application?
A. Create a streaming profile of the new application, and publish the application using the
'Streamed to client' profile.
B. Create a streaming profile of the new application, then publish the application using the
'Accessed from a server' and 'Streamed to server1 profile.
C. Upgrade the existing version of the software on the XenApp servers, and publish the application using the 'Accessed from a server' and 'Installed application' profile.
D. Install the new version of the application onto a different XenApp server, and publish the application using the 'Accessed from a server' and 'Installed application' profile.

Answer: A

QUESTION NO: 30
Which two steps are required to profile an application? (Choose two.)
A. Create a PRFILE package.
B. Store the package on a file share.
C. Create an unattended .MSI package.
D. Store the package on each XenApp server.

Answer: B,C

QUESTION NO: 31
Scenario: After the CRM application has been streamed on the XenApp servers, users complain that they can no longer open contracts for customers stored in the Adobe Acrobat file format through the CRM application. Adobe Acrobat has also been streamed to the XenApp servers. How should the administrator solve this issue?
A. Create a new .MSI package for Adobe Acrobat and publish it.
B. Create a new .PROFILE package for Adobe Acrobat and publish it.
C. Create an inter-isolation link between the CRM application .PROFILE file and the Adobe Acrobat .PROFILE file with the streaming application profiler.
D. Select a .PDF file on all XenApp servers, select 'pen With' and make sure that Adobe Acrobat has been associated with .PDF files. Select 'Always use the selected program to open this kind of file'.

Answer: B

QUESTION NO: 32
Scenario: An administrator has been asked to configure server-side streaming to the XenApp servers. The application package has been published. Which component is required for server side streaming?
A. Online plug-in
B. Offline plug-in
C. Load throttling
D. Client-to-server redirection

Answer: B

QUESTION NO: 33
Scenario: An administrator has been monitoring activity on the XenApp servers and determined that most users in an environment access published resources Monday through Friday between 7:00 am and 7:00 pm. The administrator would like to consolidate the number of active sessions outside of this time period to five servers.
Which component should the administrator configure to complete this task?
A. Load balancing policies
B. Preferential load balancing
C. Health Monitoring and Recovery
D. Power and Capacity Management

Answer: B

QUESTION NO: 34
What is the proper extension for a roaming profile in the template location for Citrix Profile
Management?
A. .DAT
B. .LOG
C. .MAN
D. .PROFILE

Answer: D

QUESTION NO: 35
Scenario: A company has six servers in the farm. The administrator wants to direct all connections by Research and Development (R&D) employees to Server1. If Server1 becomes unavailable, user connections should be directed to any available server in the farm. What must the administrator do to direct these connections to the appropriate serve rs?
A. Provide Server 1 with a lower priority than the other servers.
B. Provide Server 1 with a higher priority than the other servers.
C. Create two worker groups and configure a load balancing policy.
D. Add the R&D employees to two worker groups and configure a load balancing policy.

Answer: B

QUESTION NO: 36
Scenario: There are 20 servers in a farm. A resource-intensive application is published on five of the servers. An administrator needs to create a load evaluator that reports a full load when the number of users connecting to one of the five servers hosting the application exceeds 60. The administrator must also ensure that only users in a particular location can access the five servers hosting the application. Which two load management rules must the administrator configure for the load evaluator? (Choose two.)
A. IP Range
B. Scheduling
C. Load Throttling
D. Server User Load

Answer: A,D

QUESTION NO: 37
Scenario: A company has nine servers in the farm. An administrator wants to set the preference for user connections from Austin to three specific servers.
What must the worker group contain to direct Austin user sessions to these servers?
A. The servers in the farm
B. The Austin user accounts
C. The three specific servers
D. The Austin user accounts and servers

Answer: B

QUESTION NO: 38
Scenario: A farm contains 10 servers. An application is published on two of the servers. An administrator needs to apply a load evaluator that reports a full load when the number of users connecting to the application exceeds 100. Which load evaluator would the administrator use to meet the requirements of the scenario?
A. Default load evaluator assigned to the server
B. Custom load evaluator assigned to the server
C. Custom load evaluator assigned to the application
D. Advanced load evaluator assigned to the application

Answer: C

QUESTION NO: 39
Users are experiencing issues when attempting to connect to published resources through Access Gateway. Which two should the administrator monitor? (Choose two.)
A. Terminal Services
B. Citrix XTE Service
C. Citrix IMA Networking
D. Secure Ticket Authority

Answer: B,C

QUESTION NO: 40
For which scenario would the Advanced load evaluator be most appropriate for the environment? 
A. The number of users allowed to connect to a server should be limited to 100. Maximum load for servers must be determined by read and write operations.
B. The number of users allowed to connect to a selected application needs to be limited to 100. Maximum load for servers must be determined by page swaps.
C. A resource- and memory-intensive application is published on the servers in a farm. When CPU or memory usage reaches 90 percent, a full load should be reported.
D. An administrator needs to schedule availability of selected servers or applications. Only users connecting from client devices within a certain IP address range can access published resources on servers.

Answer: C

QUESTION NO: 41

Scenario: A company has published a memory-intensive application on all servers in the farm. By
default, each server is expected to run 100 sessions. All servers have enough memory to run the
application when other sessions NOT running the memory-intensive application are running on the
server. Testing has revealed that the application requires at least 50% free memory to launch on a
server.
How can the administrator ensure that the application will only be started on a server when it has
sufficient resources available?
A. Configure the Memory Usage rule to 50% in a custom load evaluator and assign it to the
servers.
B. Configure the Memory Usage rule to 50% in a custom load evaluator and assign it to the
application.
C. Configure the Server User Load rule to 50 sessions in a custom load evaluator and assign it to
the servers.
D. Configure the Server User Load rule to 50 sessions in a custom load evaluator and assign it to
the applications.
Answer: A


QUESTION NO: 42

Scenario: Users from the marketing department need to print on several printers. They are
complaining that the default printer in their published applications is NT the same as the default
printer on their workstations. An administrator published the application with the option "Start this
application without waiting for printers to be created" enabled.
Which action must the administrator take to resolve this issue?
A. Create a user policy; add Printing\Client printer redirection to the 'Allowed' list; assign this policy
with a filter, selecting marketing group.
B. Create a user policy; add Printing\Default printer to 'Set default printer to the client's main
printer'; assign this policy with a user filter, selecting marketing group.
C. Make sure the client Default printer option is disabled in the settings tab of the connection
properties in the Citrix Remote Desktop Session Host Configuration tool.
D. Create a user policy in the Active Directory (Windows Component\Remote Desktop
Services\Remote Desktop Session\Printer Redirection); enable the "Redirect only the default client
printer" setting; assign it to the marketing group.
Answer: D


QUESTION NO: 43

In which two ways can an administrator prevent printer drivers from being installed? (Choose two.)
A. Use Windows Print Management.
B. Enable the Printer driver mapping and compatibility policy.
C. Use the Active Directory group policy to block driver installation.
D. Configure the automatic installation of in-box printerdrivers policy.
Answer: A,C


QUESTION NO: 44

Scenario: A Citrix administrator of a large hospital's IT infrastructure is asked to configure XenApp
printing for nurses who move between workstations. All terminals are configured to connect to a
Web Interface server, and all floors have a dedicated subnet and floor specific machine IDs. The
administrator needs to make sure users always print to the network print device closest to the
device they are connecting from.
How will the administrator complete this task?
A. Configure a Session Printers policy for each subnet. Filter the policies based on Users.
B. Configure a Session Printers policy for each subnet. Filter the policies based on Client IP
address.
C. Configure an Auto-create clientprinters policy for each group of machine IDs. Filter the policies
based on Client Name.
D. Configure an Auto-create clientprinters policy for each group of machine IDs. Filter the policies
based on Access Control.
Answer: B


QUESTION NO: 45

Which statement correctly describes Citrix universal printing?
A. Citrix universal printing is a solution that will allow aXenApp server to act as a print server.
B. Citrix universal printing is a solution that allows printing without the need to install a local printer.
C. Citrix universal printing is a solution that will allow printing regardless of the operating system of
the client device.
D. Citrix universal printing is a solution that allows users to print whether or not the correct print
drivers are installed
Answer: B


QUESTION NO: 46
Under which two circumstances would an administrator create a printer driver mapping policy?
(Choose two.)
A. A specific driver is not allowed on the server.
B. A printer must be available while disconnected.
C. The drivers on the client and server are named differently.
D. The printing profile must be redirected to the client device.
Answer: C,D


QUESTION NO: 47

An administrator must configure printing in an environment to make network printers automatically
appear to all users without any setup. Which policy must the administrator implement to
accomplish this?
A. Default printers
B. Session printers
C. Universal printing
D. Auto-create generic universal printer
Answer: B


QUESTION NO: 48

Scenario: An environment contains a previously configured XenApp Services site that points to the
original XenApp farm. An administrator needs to configure a Web Interface server to connect
multiple XenApp farms so that users can access their applications using the local start menu on
their PC with the Citrix online plug-in.
How can the administrator configure the Web Interface server using the Web Interface
Management Console for this scenario?
A. Using theXenApp Web site section, add at least one server in each farm to the previously
configured farm and change the XML port so it is different.
B. Using theXenApp Services site section, add at least one server in each farm to the previously
configured farm and change the XML port so it is different.
C. Using theXenApp Services site section, add a new farm for each additional farm and at least
one server in that farm to the manage farms option; enter the correct XML port information.
D. Using theXenApp Web site management section, add a new farm for each additional farm and
at least one server in that farm to the manage farms option; enter the correct XML port
information.
Answer: C


QUESTION NO: 49

Scenario: An administrator is implementing an Access Gateway solution and needs to configure
the internal Web Interface server for use with an external Access Gateway. The administrator has
already created a new XenApp Web site named "external."
Click the 'Exhibit' button to view the secure access option for the external web site.
Which option most thoroughly describes the required steps?
A. Select the access method 'Direct', enter the FQDN of the internal URL, specify twoXenApp
servers as Secure Ticket Authority servers and select the 'Use for load balancing' option.
B. Select the access method 'Translated', enter the FQDN of the internal URL, specify twoXenApp
servers as Secure Ticket Authority servers and select the 'Use for load balancing' option.
C. Select the access method 'Gateway Direct', enter the FQDN of the external URL, specify
twoXenApp servers as Secure Ticket Authority servers and select the 'Use for load balancing'
option.
D. Select the access method 'Alternate', enter the FQDN of the external URL, specify two Web
Interface servers as Secure Ticket Authority servers and select the 'Use for load balancing' option.
Answer: A


QUESTION NO: 50
A company has deployed a new Secure Access Gateway device to secure external connections to
their XenApp farm.
Which change needs to be made to the XenApp Services web site in order to provide secure
access to XenApp resources through the Secure Access Gateway device?
A. Set the client-side proxy settings to 'Secure (HTTPS)'.
B. The Secure Access Method needs to be configured to 'Gateway direct'.
C. Kerberos authentication needs to be enabled in the properties of the Authentication method.
D. The FQDN of the Secure Access Gateway needs to be specified in the Secure Access Method
properties.
Answer: B


QUESTION NO: 51

Scenario: The administrator wants to configure Web Interface so users can access their
applications using a browser. Some users will use pass-through with smart card authentication,
while others will use smart card authentication only.
What must the administrator do to satisfy the requirements of these users?
A. Enable both authentication methods for a single Web Interface site.
B. Create a Web Interface Services site and apply both authentication methods.
C. Enable Pass-through authentication to pass the Windows logon method to a site.
D. EnableExplicit authentication to allow the site to adapt the authentication method.
Answer: B


QUESTION NO: 52

Scenario: An administrator wants to configure the enumeration speed for two Web Interface
servers to ensure the fastest response time possible for users. The datacenter for the XenApp
servers is 500 miles from office "A" and 1200 miles from office "B".
Which location for the Web Interface servers will optimize the enumeration speed of user
applications?
A. In the datacenter on the same subnet asXenApp servers
B. One web server in each office to be accessed by local users
C. In the datacenter on the same subnet with only Web servers to isolate HTTP traffic
D. One in the datacenter, one in Office "A" with users directed to the closest web server
Answer: D


QUESTION NO: 53

Scenario: An administrator has just configured a Web Interface server. The XenApp farm is
configured with the default settings. The data collector is CTXDC01 and the member server is
CTXXA01.
Click on the 'Exhibit' button to review the scenario.
What is the issue in this scenario?
A. In the XML port field, the value should read "80."
B. In the Resourcestypes field, the value should read "Offline."
C. In the Authentication methods field, the value should read "Prompt."
D. In the XML Service field, the value should read "CTXDC01, CTXXA01."
Answer: A


QUESTION NO: 54

Scenario: An administrator wants to add the ability to stream applications to XenApp servers in an
environment in order to cut down on the number of applications installed and managed. Users
currently access the installed applications on the XenApp servers using the Citrix online plug-in
configured with the URL of a XenApp Services site configured for online access.
Which two steps are required to achieve the desired functionality? (Choose two.)
A. Install the Citrix offline plug-in on theXenApp servers.
B. Install the Citrix offline plug-in on the user's client device.
C. Change the existingXenApp Services site configuration resource type to 'Dual Mode'.
D. Create a newXen App Services site and choose the 'Offline' resource type; configure the
existing XenApp Services site to use the new site as a backup.
Answer: A,D

QUESTION NO: 55

Scenario: A company has successfully implemented a XenApp farm together with a dedicated
Web Interface server. All clients are configured with the Citrix online plug-in and the site name for
the configured site within Web Interface is XAPROD. To increase the high availability of the
solution, an administrator configures a second Web Interface server.
What must the administrator configure to ensure that users can still connect to their applications
even in the event of a Web Interface server failure?
A. The Backup option within the server settings of the XAPROD site in the XenApp Web site node.
B. The redirection option within the server settings of the XAPROD site in theXenApp Web site
node.
C. The Backup option within the server settings of the XAPROD site in the XenApp Services site
node.
D. The redirection option within the server settings of the XAPROD site in theXenApp Services site
node.
Answer: B


QUESTION NO: 56

Scenario: Several printers are set up on each user's Windows workstation. Users are complaining
on a daily basis that XenApp published applications take too long at start-up.
Which two actions could an administrator take to reduce start-up time? (Choose two.)
A. Reduce the number of print drivers loaded at start-up.
B. Set up only the default printer on the client to be Auto-created.
C. Set up Auto-created printer creation after application launches.
D. Allow users to self-provision printers by publishing the ICA Client Printer Configuration tool.
Answer: A,B

QUESTION NO: 57

When using the qfarm /load command, what would be displayed as the server load value when a
server has a full load?
A. 0
B. 1000
C. 9999
D. 10000
Answer: D


QUESTION NO: 58

An administrator needs to reset the session of a user who has become disconnected.
Which two tools will allow the administrator to accomplish the reset against a remote server?
(Choose two.)
A. Performance monitor
B. Windows Task Manager
C. Delivery Services Console
D. Remote Desktop Services Manager
Answer: C,D


QUESTION NO: 59

The ActiveX control required by the Web Interface is NOT allowed to run with the current Internet
Explorer settings. How should an administrator resolve this issue?
A. Add the site to the Local Intranet trusted sites.
B. Reset the client Internet Explorer setting to the default to allow ActiveX controls.
C. Under the Advanced security tab, select 'Allow active content to run files on my computer.'
D. Add the Web Interface site to the Trusted Sites within IE using the Default security settings for
the zone.
Answer: C


QUESTION NO: 60

Scenario: Using a custom load evaluator that utilizes only the Server User Load with the default
setting, an administrator wants to use the qfarm /load command to see the server load value.
What is the value the administrator will see displayed for a server with 17 users with active
connections and two disconnected sessions?
A. 17
B. 19
C. 1700
D. 1900
Answer: A


QUESTION NO: 61

Which two conditions could prevent the Citrix Universal Printer from appearing in the list of users'
auto-created printers? (Choose two.)
A. The driver is not supported.
B. The user is running a terminal device.
C. The user is running an outdated online plug-in.
D. The driver is on the blacklist in the Printer driver mapping and compatibility policy.
Answer: B,C


QUESTION NO: 62

Scenario: Some users complain that they cannot reconnect to their disconnected sessions. After
investigation, the administrator discovers that no users are able to connect to Server1.
Which two issues could cause the problem? (Choose two.)
A. Logons have been disabled forServerl
B. Online plugin is not installed onServerl
C. IMA Service is not running on the Server1
D. Session reliability has been enabled on Server1
Answer: C,D

QUESTION NO: 63

Users are complaining that their local printers are NOT available in their XenApp sessions when
running from a Windows client. Which troubleshooting step should the administrator take?
A. Install the Universal Print driver on the client device.
B. Verify a network printer is set up on the client device.
C. Check that Session printing is enabled in the Citrix policy.
D. Verify that the Auto-create clientprinters policy rule does not prohibit printer creation.
Answer: C