Cisco Router Configuration Commands

Requirement
*Cisco Command*

Set a console password to cisco
Router(config)#*line con 0*
Router(config-line)#*login*
Router(config-line)#*password cisco*
Set a telnet password
Router(config)#*line vty 0 4*
Router(config-line)#*login*
Router(config-line)#*password cisco*
Stop console timing out
Router(config)#*line con 0*
Router(config-line)#*exec-timeout 0 0*
Set the enable password to cisco
Router(config)#*enable password cisco*
Set the enable secret password to peter.
This password overrides the enable password and is encypted within the
config file
Router(config)#*enable secret peter*
Enable an interface
Router(config-if)#*no shutdown*
To disable an interface
Router(config-if)#*shutdown*
Set the clock rate for a router with a DCE cable to 64K
Router(config-if)*clock rate 64000*
Set a logical bandwidth assignment of 64K to the serial interface
Router(config-if)*bandwidth 64*
*Note that the zeroes are not missing*
To add an IP address to a interface
Router(config-if)#*ip addr 10.1.1.1 255.255.255.0*
To enable RIP on all 172.16.x.y interfaces
Router(config)#*router rip*
Router(config-router)#*network 172.16.0.0*
Disable RIP
Router(config)#*no router rip*
To enable IRGP with a AS of 200, to all interfaces
Router(config)#*router igrp 200*
Router(config-router)#*network 172.16.0.0*
Disable IGRP
Router(config)#*no router igrp 200*
Static route the remote network is 172.16.1.0, with a mask of 255.255.255.0,
the next hop is 172.16.2.1, at a cost of 5 hops
Router(config)#*ip route 172.16.1.0 255.255.255.0 172.16.2.1 5*
Disable CDP for the whole router
Router(config)#*no cdp run*
Enable CDP for he whole router
Router(config)#*cdp run*
Disable CDP on an interface
Router(config-if)*#no cdp enable*