Skip to main content

AT Utility - A quick guide to At jobs in Sun Solaris

A quick reference guide for “at” utility in Sun Solaris. “at” utility in unix is similar to the “cron” daemon except for that “at” jobs are run only once while cron jobs are recurring. “at” is primarily used to schedule a job which can be command or a script to run once at a particular time although it can be made to reschedule the job. This could be immediatly or at a later time.

The at utility reads commands from standard input and groups them together as an at job, to be executed at a later time.

List AT jobs

To list all the at jobs scheduled on the Sun Server

sunsolaris# at -l
user = root 1210161000.a Wed May 7 12:50:00 2008
user = root 1210161001.a Wed May 7 12:50:01 2008
user = root 1210198500.a Wed May 7 23:15:00 2008
user = root 1210331460.a Fri May 9 12:11:00 2008
user = root 1210198320.a Wed May 7 23:12:00 2008

To run a command at a particular time

sunsolaris# at -t 200805072312
at> reboot
at>
commands will be executed using /sbin/sh
job 1210198320.a at Wed May 7 23:12:00 2008

In the above -t switch defines the time that follows it as the time at which the one or more command that follows at the “at>” prompt to be run. Once, all the commands are entered press “CTRL+D” to make “at” aware of the end of commands.

Run a job now

sunsolaris# at now
at>reboot
at>
commands will be executed using /sbin/sh
job 1210100190.a at Tue May 6 19:56:30 2008

Run at noon (12pm)

sunsolaris# at noon
at> uname -a
at>
commands will be executed using /sbin/sh
job 1210158000.a at Wed May 7 12:00:00 2008

Run at midnight

sunsolaris# at midnight
at> uname -a
at>
commands will be executed using /sbin/sh
job 1210114800.a at Wed May 7 00:00:00 2008

To run a job “n” mins from now

Say you want to run the command in 5 minutes from now

sunsolaris# at now + 5minutes
at> uname -a
at>
commands will be executed using /sbin/sh
job 1210100631.a at Tue May 6 20:03:51 2008

To run a script or a file

sunsolaris# at -f /root/myscript now

The above runs the script /root/myscript immediatly. The switch “-f” defines the file to be run instead of commands.

To remove/cancel an at job

sunsolaris# at -r

For instance, in the following list of jobs I want to cancel the last job “1210100631.a” job.

sunsolaris# at -l
user = root 1210161000.a Wed May 7 12:50:00 2008
user = root 1210161001.a Wed May 7 12:50:01 2008
user = root 1210198500.a Wed May 7 23:15:00 2008
user = root 1210331460.a Fri May 9 12:11:00 2008
user = root 1210198320.a Wed May 7 23:12:00 2008
user = root 1210158000.a Wed May 7 12:00:00 2008
user = root 1210114800.a Wed May 7 00:00:00 2008
user = root 1210100631.a Tue May 6 20:03:51 2008

sunsolaris# at -r 1210100631.a

sunsolaris# at -l
user = root 1210161000.a Wed May 7 12:50:00 2008
user = root 1210161001.a Wed May 7 12:50:01 2008
user = root 1210198500.a Wed May 7 23:15:00 2008
user = root 1210331460.a Fri May 9 12:11:00 2008
user = root 1210198320.a Wed May 7 23:12:00 2008
user = root 1210158000.a Wed May 7 12:00:00 2008
user = root 1210114800.a Wed May 7 00:00:00 2008

Now, you can see the last job removed from the scheduled list.

at job using a desired shell

To use C shell (csh)

sunsolaris -c -f /etc/myfile now

-c specifies the shell to be used as bash.

To use bash (sh)

sunsolaris -s -f /etc/myfile now

-s specifies the shell to be used as bash.
To email user

To email user who scheduled the at job once the at command is run

sunsolaris -m -f /etc/myfile now

The -m specifies at job to email the user once the job is run.

The at jobs are saved as files under

/var/spool/cron/atjobs

To see whats in a job, do a “cat”

sunsolaris# cat 1210114800.a
: at job
: jobname: stdin
: notify by mail: no
: project: 1
export HOME; HOME=’/’
export HZ; HZ=”
export LANG; LANG=’C’
export LOGNAME; LOGNAME=’root’
export MAIL; MAIL=’/var/mail/root’
export PATH; PATH=’/usr/sbin:/usr/bin’
export SHELL; SHELL=’/sbin/sh’
export TERM; TERM=’xterm’
export TZ; TZ=’GB’
$SHELL << ‘…the rest of this file is shell input’
#ident “@(#).proto 1.6 00/05/01 SMI” /* SVr4.0 1.2 */
cd /etc/dhcp
umask 22
ulimit unlimited
uname -a

Comments

Popular posts from this blog

INSTALL CISCO VPN CLIENT ON WINDOWS 10 (32 & 64 BIT). FIX REASON 442

This article shows how correctly install Cisco VPN Client (32 & 64 bit) on Windows 10 (32 & 64 bit) using simple steps, overcome the ‘ This app can’t run on this PC ’ installation error , plus fix the Reason 442: Failed to enable Virtual Adapter error message . The article applies to New Windows 10 installations or Upgrades from earlier Windows versions and all versions before or after Windows 10 build 1511 .  To simplify the article, we’ve broken it into the following two sections: How to Install Cisco VPN client on Windows 10 (clean installation or upgrade from previous Windows), including Windows 10 build prior or after build 1511 . How to Fix Reason 442: Failed to enable Virtual Adapter on Windows 10 Figure 1. The Cisco VPN Client Reason 442: Failed to enable Virtual Adapter error on Windows 10 HOW TO INSTALL CISCO VPN CLIENT ON WINDOWS 10 (NEW INSTALLATIONS OR O/S UPGRADES) The instructions below are for new or clean Windows 10 inst...

How to Disable SSL for Webmin

Webmin is a Web application that enables administrators to manage Linux servers. Webmin runs on a Web server at port 10000. Miniserv is the name of the Web server application that handles the Webmin Web application. By default, Miniserv uses SSL. However, you can disable SSL for Webmin Miniserv by editing the configuration file for the Web application. With SSL disabled, you can access the Webmin application over a standard HTTP connection. Step 1 Open a terminal window on the Linux server. You can also SSH into the server if you do not have physical access to the machine. Step 2 Type the following command at the command prompt and press the “Enter” key: nano /etc/webmin/miniserv.conf This command opens the Miniserv configuration file in the Nano text editor.

Error 651: How to Fix it in Windows 7/8

If you are a windows user then it is possible that you have Face Error 651 Anytime. There are many windows user who get affected by this error code 651 while working online. If you are one of those windows user, then keep reading this article and carefully read out the following Detailed solutions which I have gathered after researching various websites, articles, forums etc. When using Windows 7 built-in PPPoE wizard with a modem working in bridge mode, it fails and error code 651 appears. The similar problem happens on Windows Vista or previous versions as well. For example, Error code 678 on Windows XP is equivalent to error code 651 on Windows 7. Error code 651 usually occurs when user tries to connect it’s broadband in windows 7 operating system. It shows a message that Your modem (or other connecting devices) has reported an error and Usually the message will be “Connection failed with error 651” .Fix Error 651 In such cases user tries to resta...